12652
45
Zoom out
Zoom in
Previous page
1/64
Next page
39
7
OTHER FUNCTIONS
6
7
Intercom operation
The optional intercom function allows you to talk to the deck
from the cabin. The optional COMMANDMICIII™ is required
for intercom operation.
Connect the COMMANDMICIII™ as described on p. 51.
• Up to two COMMANDMICIII™s can be connected simultaneously.
• Transmitting is impossible during intercom operation.
• The received signal is muted during intercom operation.
q Push [F], then push [9 ] to enter intercom mode.
• The COMMANDMICIII™ power is automatically turned ON, even
if the power is OFF.
When the connected COMMANDMICIII™ is one, step w
does not appear. Go to step e.
w Select the desired intercom party, transceiver
(RADIO) or
COMMANDMICIII™
(INTERCOM)
, then push [ENT]*.
* Push []from the HM-162E.
NOTE: The COMMANDMICIII™, connected to the [COM-
MAND MIC-1] connector, is recognized as ‘INTERCOM1,’
and the other side is ‘INTERCOM2.’
e Push and hold [9 ] for more than 1 sec. to emit the in-
tercom beep while holding.
• The transceiver and the COMMANDMICIII™ emit beeps.
r Push and hold [PTT] and speak at a normal voice level
into the microphone.
•“
TTAALLKK
” or “
LLIISSTTEENN
” appears on the caller or listener function
display, respectively.
• “
WWAAIITT
” appears if it is idle.
• To adjust the IC-M603’s speaker output level, rotate [VOL].
To adjust the HM-162E’s speaker output level, rotate [SELEC-
TOR].
t After releasing [PTT] you can hear the response through
the speaker.
y To return to normal operation, push [CLR] or repeat step
q.
IC-M603 (caller)
HM-162E (listener)
INTERCOMINTERCOM
TALKTALK
INTERCOM1INTERCOM1
INTERCOMINTERCOM
LISTENLISTEN
0
RADIORADIO
The connected intercom party is
displayed here.
IC
25W25W INTINT
DUPDUP
TAGTAG
˘INTERCOM1INTERCOM1
INTERCOM2INTERCOM2
<ENT˘OK>OK> TELEPHONETELEPHONE
25W25W INTINT
DUPDUP
TAGTAG
˘RADIORADIO
INTERCOM1INTERCOM1
<ENTENT˘OK>OK> TELEPHONETELEPHONE
IC-M603
HM-162E
Select within 5 sec. from
entering intercom mode.
IC
IC
!IC-M603.qxd 06.7.28 1:46 PM Page 39 (1,1)
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M603 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info