Manual Icom IC-M602 (page 62 of 78) (English)

12650

Zoom out

Zoom in

1/78

SPECIFICATIONS AND OPTIONS

■ Speciﬁcations

General

• Frequency coverage :

Transmit 156.025–157.425 MHz

Receive 156.050–163.275 MHz

• Mode : FM (16K0G3E)

DSC (16K0G2B)

• Current drain (at 13.8 V) : TX high (25 W) 5.2 A typical

Max. audio 1.2 A typical

• Power supply requirement: 13.8 V DC ±15%

(negative ground)

• Frequency stability : ±5 ppm

(–20°C to +60°C;

–4°F to +140°F)

• Antenna impedance : 50 Ω nominal

• Input impedance (MIC) : 2 kΩ

• Output impedance (audio): 4 Ω

• Intermediate frequencies : 1st; 31.05 MHz, 2nd; 450 kHz

(CH 70 receiver) 1st; 21.7 MHz, 2nd; 450 kHz

• Dimensions : 220(W)× 110(H) × 109.4(D) mm

(Projections not included) 8

⁄32(W) ×4

⁄32(H) ×4

⁄16(D) in

• Weight : 1350 g; 2 lb 16 oz

Transmitter

• RF output power : 25 W and 1 W

• Modulation system : Variable reactance frequency

modulation

• Max. frequency deviation : ±5.0 kHz

• Spurious emissions : Less than –70 dBc

• Adjacent channel power : More than 70 dB

• Audio harmonic distortion : Less than 10%

(at 1 kHz, 60% deviation)

• Residual modulation : More than 40 dB

• Audio frequency response: +1 to –3 dB of 6 dB/octave

range from 300 Hz to 3000 Hz

Receiver

• Receive system :

Double conversion superheterodyne

• Sensitivity (12 dB SINAD) : Less than 0.32 µV

Less than 0.32 µV

(CH 70 receiver)

• Squelch sensitivity : Less than 0.32 µV

• Spurious response : More than 80 dB

• Intermodulation : More than 80 dB

•

Adjacent channel selectivity

: More than 80 dB

• Hum and noise : More than 40 dB

• Audio output power : 5 W typical at 10% distortion

with a 4 Ω load

All stated specifications are subject to change without

notice or obligation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M602 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M602 Manual

Product: