Manual Icom IC-M504 (page 65 of 80) (English)

12632

Zoom out

Zoom in

1/80

CONNECTIONS AND MAINTENANCE

CAUTION: After connecting the DC power cable, NMEA

IN/OUT leads, external speaker lead and hailer/foghorn lead,

cover the connector and leads with an adhesive tape as

shown below, to prevent water seeping into the transceiver.

* The supplied ferrite core must be attached to the NMEA

in/out leads and DC power cables as illustrated at left. Fix

the ferrite core near the transceiver with the two supplied

ties to prevent it from moving.

■ Fuse replacement

One fuse is installed in the supplied DC power cable. If a fuse

blows or the transceiver stops functioning, track down the

source of the problem if possible, and replace the damaged

fuse with a new one of the proper rating.

■ Supplied accessories

■ Antenna

A key element in the performance of any communication sys-

tem is the antenna. Ask your dealer about antennas and the

best place to mount them.

Connection cable*

(OPC-1000: 6m; 20 ft)

Mounting bracket For mounting bracket

DC power cable

(OPC-891A)

Microphone hanger

and screws (3×16)

Knob bolts

Screws (5×20)

Flat washers (M5)

Spring washers (M5)

Warning

sticker

Ferrite core

and ties

Mounting base*

Tapping screws*

(M3 × 16)

For microphoneMicrophone*

*Depending on version

Fuse rating: 10 A

Rubber vulcanizing

tape

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M504 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M504 Manual

Product: