12630
40
Zoom out
Zoom in
Previous page
1/50
Next page
36
12
HM-134 REMOTE-CONTROL MICROPHONE
Starting a scan
q While pushing and holding [H/L],
push [DIAL] several times to select
the channel group (USA or INT), if
desired.
w Push [SCAN] to start priority or nor-
mal scan.
•“SCAN appears during normal scan.
The priority channel readout indicates
16, and P and SCAN indicators ap-
pear during priority scan.
When a signal is received, scan pauses
until the signal disappears or resumes
after pausing 5 sec. according to set
mode setting (Channel 16 is still moni-
tored during priority scan).
Push [Y]/[Z] to check the scanning tag
channels, to change the scanning direc-
tion or resume the scan manually.
e To stop the scan, push [SCAN].
•“SCAN disappears.
Pushing [PTT], [16C] or [DIAL] also
stops the scan.
Setting tag
channels
q While pushing and holding [H/L],
push [DIAL] several times to select
the channel group (USA and INT), if
desired.
w Push [Y]/[Z] to select the desired
channel to set as a tag channel.
e Push and hold [SCANTAG] for
1 sec. to set the displayed channel
as a tag channel.
•“ appears.
r To cancel the tag channel setting,
push and hold [SCANTAG] for
1 sec.
•“ disappears.
Clearing all tag channels in the
selected channel group
While pushing and holding [H/L],
push [SCANTAG] for 3 sec. to clear-
ing all tag channels. (until long beep
changes to 2 short beeps)
Dualwatch/Tri-
watch operation
q Push [Y]/[Z] to select the desired
channel.
While pushing and holding [H/L], push
[DIAL] several times to select the chan-
nel group (USA, INT), if desired.
w Push [DUAL] to start dualwatch or
tri-watch.
•“DUAL appears during dualwatch; TRI
appears during tri-watch.
Beep tone sounds when a signal is re-
ceived on Channel 16.
Tri-watch becomes dualwatch when re-
ceiving a signal on the call channel.
e To cancel dualwatch/tri-watch, push
[DIAL] again.
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 36 (1,1)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M503 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info