12624
17
Zoom out
Zoom in
Previous page
1/34
Next page
Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Chan-
nels set as non-tag channels will be skipped during scanning.
Tag channels can be assigned to each channel group (Inter-
national, U.S.A., Holland, DSC, ATIS) independently.
q While pushing [HI/LO], push [DIAL] one or more times to
select the desired channel group, if desired.
w Select the desired channel to set as a tag channel.
e Push [SCAN/TAG] for 1 sec. to set the displayed channel
as a tag channel.
•“TAG appears in the function display.
r To cancel the tag channel setting, repeat e.
•“TAG disappears.
Clearing all tag channels in the selected channel group
While pushing [HI/LO], push [DIAL] for 3 sec. to clear all
tag channels in the channel group.
Starting a scan
Set scan type (priority or normal scan) and scan resume timer
in advance using set mode. (p. 15)
q Set tag channels as described at left.
w While pushing [HI/LO], push [DIAL] one or more times to
select the desired channel group, if desired.
e Push [SCAN] to start priority or normal scan.
•“Pri scan 16 or Normal scan appears in the function display.
When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to set mode set-
ting. (Channel 16 is still monitored during priority scan.)
Rotate the channel selector to check the scanning tag channels,
to change the scanning direction or resume the scan manually.
•“16 ashes and a beep tone sounds when a signal is received
on channel 16 during priority scan.
r To stop the scan, push [SCAN].
•“Pri scan or Normal scan disappears.
5
SCAN OPERATION
13
INT
25W
DUPTAG
INTL
INT
25W
DUPTAG
Normalscan
BUSY INT
25W
DUPTAG
Normalscan
SCAN
TAG
Push
Scan starts. When a signal is received
[Example]: Starting a normal scan.
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 13
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M501 EURO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M501 EURO in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info