12616
21
Zoom out
Zoom in
Previous page
1/24
Next page
17
6
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes on. Power cord not connected properly.
Blown fuse.
Check the power cord connection.
Check the polarity of the power connection,
then, replace the fuse.
p. 14
p. 13
No sound comes from the
speaker.
[SQUELCH] is rotated too far clockwise. Rotate [SQUELCH] counterclockwise to a
suitable position.
p. 7
Sensitivity is low and only
strong signals are audible.
[SQUELCH] is rotated too far clockwise.
Antenna feedline or the antenna connector
solder has poor contact or is short circuited.
Rotate [SQUELCH] counterclockwise to a
suitable position.
Check, and if necessary, replace the feedline or
solder the antenna connector again.
p. 7
p. 14
Transmitting is impossible or
high power cannot be
selected.
Transmission is restricted on some channels. Change channels. p. 18
Desired channel cannot be
selected.
Different channel group is selected. Push [CH/WX] + [H/L] to select the appropriate
channel group (U.S.A., INT or CAN).
p. 6
No display backlighting. Backlight function is turned OFF. While pushing [H/L DIM], push [UP]/[DN] to
select the desired brightness.
p. 10
Scan does not start. No TAG channels are programmed. Set channels to be scanned as TAG channels. p. 9
No beeps sound even when a
switch is pushed.
Beep function is turned OFF. Set beeps to ON in SET mode. p. 12
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M45A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M45A in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info