12614
17
Zoom out
Zoom in
Previous page
1/64
Next page
11
4
SCAN OPERATION
New2001
4
Setting TAG channels
For more efficient scanning, add the desired channels as TAG
channels or clear the TAG for unwanted channels.
Channels that are not tagged will be skipped during scanning.
TAG channels can be assigned to each channel group (USA,
INT, CAN) independently.
q Push both [Y] and [Z] to select the desired channel group
(USA, INT or CAN.)
w Select the desired channel to be set as a TAG channel.
e Push [SCAN
TAG] for 1 sec. to set the displayed channel
as a TAG channel.
• “ ” appears in the display.
r To cancel the TAG channel setting, repeat step e.
• “ ” disappears.
Clearing (or setting) all tagged channels
While pushing [HI/LO] on the microphone, push [SCAN
TAG]
for 3 sec. (until a long beep changes to 2 short beeps) to clear
all TAG channels in the channel group.
• Repeat above procedure to set all TAG channels.
Starting a scan
Set scan type (Priority or Normal scan) and scan resume
timer in advance, using Set mode. (p. 32)
q Push both [Y] and [Z] to select the desired channel group
(USA, INT, CAN) if desired.
w Set TAG channels as described at left.
e Make sure the squelch is closed to start a scan.
r Push [SCAN
TAG] to start Priority or Normal scan.
• “ ” appears at the channel comment indicator during Pri-
ority scan.
• “ ” appears at the channel comment indicator during Normal
scan.
When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to Set mode
setting. (Channel 16 is still monitored during Priority scan.)
• Push [Y] or [Z] to check the scanning TAG channels, to change
the scanning direction or resume the scan manually.
A beep tone sounds and “ ” blinks at the channel comment in-
dicator when a signal is received on Channel 16 during Priority
scan.
t To stop the scan, repeat step r.
[Example]: Starting a Normal scan.
Push
Scan starts.
When a signal is
received.
Blinks Blinks
!IC-M422-3.qxd 06.8.11 9:23 AM Page 11 (1,1)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M422 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M422 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info