12602
35
Zoom out
Zoom in
Previous page
1/40
Next page
29
10
TROUBLESHOOTING
9
10
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No sound from speaker. Squelch level is too deep.
Volume level is too low.
Speaker has been exposed to water.
p. 10
p. 10
Set squelch to the threshold point.
Push [+]/[] to set a suitable level.
Drain water from the speaker.
The transceiver does
not turn ON.
The battery is exhausted.
Bad connection to the battery pack.
p. 23
p. 3
Recharge the battery pack.
Check the connection to the transceiver.
Transmitting is impossi-
ble, or high power can
not be selected.
Some channels are for low power or re-
ceive only.
The battery is exhausted.
The battery over charged.
The output power is set to low.
pgs. 8,
9, 30
p. 23
p. 11
Change channels.
Recharge the battery pack.
Verify the battery voltage is correct.
Push [H/L
LOCK] to select high power.
The displayed channel
cannot be changed.
Lock function is activated. Push [H/L
LOCK
] for 1 sec. to cancel the
function.
p. 13
Scan does not start. •“TAG channels are not programmed. Set the desired channels as TAG channels. p. 15
No beeps. Beep tones are turned OFF. Set the beep tones to ON (Fix Beep/User
Beep) in SET mode.
p. 18
Self check error.
(Temperature)
The temperature is outside of 25°C to
+65°C; 13°F to +149°F (approx)
Leave the transceiver at room temperature
for a while. Turn the power ON to check if the
internal temperature has returned to normal.
Self check error.
(Battery voltage)
The connected battery packs voltage is
more than 11 V.
Verify the battery voltage is correct.
Self check error.
(Water intrusion)
Water has entered the transceiver. Have the transceiver checked at your local
distributor or dealer to see whether the trans-
ceiver works properly or not.
IC-M32-2.qxd 04.1.20 11:06 AM Page 29 (1,1)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M32 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info