Manual Icom IC-M2A (page 24 of 32) (English)

12596

Zoom out

Zoom in

1/32

BATTERY CHARGING

■ Installing batteries in the

battery case (Not supplied with some versions)

When using a battery case attached to the transceiver, install

6 × AA(R6) size alkaline batteries as illustrated below.

q Remove the battery case from the transceiver.

w Install 6 × AA(R6) size alkaline batteries.

• Be sure to observe the correct polarity.

CAUTION:

• When installing batteries, make sure they are all the

same brand, type and capacity. Also, do not mix new and

old batteries together.

• Keep battery contacts clean. It’s a good idea to clean bat-

tery terminals once a week.

ï Charging connections

q Attach the BC-150 to a ﬂat surface, such as desk or cabin, etc., if

desired.

w Connect the AC adapter (BC-147A/E or BM-95V) as shown below.

e Insert the battery pack with/without the transceiver into the

charger.

• The charge indicator lights green.

r Charge the battery pack approx. 8 hours, depending on the re-

maining power condition.

CAUTION: DO NOT charge BP-224 more than 12 hours.

Otherwise, BP-224 will be damaged. BP-224 must

be charged for 8–12 hours only.

AC adapter

(BC-147A/E

or BM-95V)

BC-150

BP-224

IC-M2A

Supplied screws

Charge indicator

Lights green when

BP-224 (with/without

IC-M2A) is inserted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M2A in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M2A Manual

Product: