522357
21
Zoom out
Zoom in
Previous page
1/36
Next page
Setting TAG channels
For more efficient scanning, add the desired channels as
TAG channels, or clear the TAG on unwanted channels.
Channels that are not tagged will be skipped while scan.
TAG channels can be independently assigned to each USA,
International, Canada and ATIS channel group.
q Hold down [CH] for 1 second one or more times to select
the desired channel group.
w Select the desired channel to be set as a TAG channel.
e Hold down [TAG] (FAV) for 1 second to set the displayed
channel as a TAG channel.
appears on the display.
r
To cancel a TAG channel setting
, hold down
[TAG] (FAV) for
1 second.
disappears.
Clearing (or setting) all tagged channels
While holding down [TAG] (FAV), turn ON the power to clear
all TAG channels in the selected channel group.
Repeat above procedure to set all channels as TAG channels
(when no TAG channel has been set.)
Starting a scan
Set the Priority Scan function, Scan Resume Timer and Auto
Scan function in advance, in the Set mode. (p. 18)
q Hold down [CH] for 1 second one or more times to select
a desired channel group.
w Push [SCAN] to start a priority or normal scan.
SCAN blinks while scanning.
“16” appears on the sub channel readout during a priority scan.
When a signal is received, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending on
the Set mode setting.
Push [Y] or [Z] to sequentially select TAG channels, change
the scanning direction or manually resume the scan.
e To stop the scan, push [SCAN] again.
SCAN disappears.
Pushing [PTT], [16], [CH] or [FAV] also stops the scan.
15
5
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
[Example]: Starting a normal scan.
Push
Blinks Blinks
Scanning starts
When a signal is received
Appears
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M23 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info