12546
13
Zoom out
Zoom in
Previous page
1/32
Next page
9
4
BASIC OPERATION
4
Call channel programming
The call channel switch is used to select the default channel,
however, you can program your most often-used channel for
quick recall.
q Push [CALL] to select the call chan-
nel.
•“CALL and call channel number
appear.
w Push [CALL] again for 3 sec. (until a
long beep changes to 2 short beeps)
to enter call channel programming
condition.
Call channel number to be programmed
ashes.
e Push [Y]/[Z] to select the desired
channel.
r Push [CALL] to program the dis-
played channel as the call channel.
The call channel number stop ashing.
Adjusting the squelch level
To adjust the IC-GM1600Es squelch level, use the [Y]/[Z] keys
as desired below. In order to receive signals properly, the
squelch must be adjusted to the proper level.
q Push [SQL
MONI], then adjust the squelch level with [Y]/[Z].
- SQL indicator starts blinking.
- There are 11 squelch levels to choose from: OP is completely
open; 10 is tight squelch; 1 is loose squelch level.
- When no switch is pushed for 5 sec., the transceiver returns to
normal condition.
w Push [SQLMONI] again to return to normal condition.
Blinks during the squelch
level adjutment.
Indicates the
squelch level.
Push
IC-GM1600E-1.qxd 2006.07.14 2:28 PM Page 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-GM1600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-GM1600E in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info