670412

Icom IC-FR9020 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
9
24 DISPLAYING THE FIRMWARE
VERSIONS
Both the radio and DSP firmware versions are indi-
cated on the LCD after the radio switches ON for 2
seconds, unless a “Starting Message” has been pro-
grammed.
Figure 39 displays Radio and DSP Firmware versions.
Figure 39
Figure 40 shows the programmable starting message
“Your Message Here”.
Figure 40
25 DISPLAYING THE SERIAL NUM-
BER
Push and Hold [D], turn ON the radio, the serial num-
ber is indicated (Maximum 8 digits). When the [D] key
is released, the radio will reboot in the normal mode.
Figure 41 shows KY0000329 serial number.
Figure 41
26 DISPLAYING THE PROGRAM-
MING SOFTWARE VERSION
Push and Hold [A], and turn ON the radio, the program-
ming software version is indicated. When the [A] key is
released, the radio will reboot in the normal mode.
Figure 42 shows V-0.2.3195 version.
Figure 42
27 DATA CHECK
The IC-FR9010/FR9020 has a self diagnostic function.
All data in the EEROM is checked every time the radio
is switched ON. If the data is not properly stored, the
radio automatically turns to programming mode.
Figure 43 shows ERROM Data error.
Figure 43
28 ERROR MESSAGES
If there is a problem with the RX PLL, TX PLL or PA,
then the ALM LED flashes ON and indicates which
section has the issue. Figure 46 displays a RX PLL
error, note this may be displayed in REM mode if the
remote channel lines are open or a channel is selected
remotely that is not programmed. (EXXX will be dis-
played instead of CXXX, where XXX is the channel
number.)
Figure 44 displays a RX PLL error.
Figure 45 displays a TX PLL error.
Figure 46 displays a PA error.
Figure 44
Figure 45
Figure 46
29 FIRMWARE ERROR DETECTION
When the radio itself detects a malfunction, the main
CPU will restart automatically.
Serial KY000329
Set by p-kgprg 023195
EEROM Data Error
RX
TX
C001 MD N
RX PLL Error
RX
TX
C001 MD N
TX PLL Error
RX
TX
C001 MD N
PA Error
Your Message Here
<71BSV200A710>
<DSP V109>
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-FR9020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR9020 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info