12540

Icom IC-FR3100 FR4100 Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
2
1
PANEL DESCRIPTION
!6 ANI CLEAR SWITCH [ANI CLR]
Push for 1 sec. to clear the received ANI ID indica-
tion on the display and return to the original indica-
tion.
NOTE: This switches’ function is not available for
some versions.
!7 DEALER-PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
!8 PROGRAMMED FUNCTION INDICATOR
Lights green while the pre-programmed function is
activated.
!9 DC INDICATOR
Lights green during DC operation.
DD
Function display
q MEMORY CHANNEL INDICATOR
Shows the selected memory channel.
w TRANSMIT POWER INDICATOR
Shows the output power level.
e AUDIBLE INDICATOR
“@” appears during audible condition, disappears
during inaudible condition. (During audible condi-
tion, the audio mute is cancelled.)
r ALPHANUMERIC INDICATORS
Shows a variety of text or code information.
32H H@H ICOMH INC.
q
w
e
r
■ Rear panel
q TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥ Connects a transmit antenna (impedance: 50 Ω)
and outputs transmit signals.
➥ When installing an optional internal duplexer
(supplied by a third party), this connects the
transmit/receive to an antenna.
w
EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4 Ω external speaker.
e REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 3 for remote connector information.
r ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 3, 4 for accessory connector information.
t RECEIVE ANTENNA CONNECTOR [RX]
➥ Connects a receive antenna (impedance: 50 Ω)
and inputs received signals.
➥ When installing an internal duplexer (supplied by
third party), do not use this connector.
y AC POWER SOCKET [AC]
Connects the supplied AC power cable to a domes-
tic AC outlet.
u GROUND TERMINAL [GND]
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
i DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
CAUTION: NEVER short the (+) line of the DC
power cable to the repeater’s chassis when con-
necting a DC power cable to the [BATTERY] termi-
nals. Otherwise there is danger of electric shock
and/or equipment damage.
TX/TX•RX
EXT SP REMOTE
ACC
RX
GND
AC
BATTERY
q e r t y u
i
w
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-FR3100 FR4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR3100 FR4100 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info