670364
12
Zoom out
Zoom in
Previous page
1/48
Next page
8
2
PANEL DESCRIPTION
SCAN ADD/DEL (TAG) KEY SCAD
Push to add or delete the selected channel to/from the scan
group.
PRIO A/B KEYS PRA/PRAR/PRB/PRBR
Push to select Priority A or Priority B channel.
Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] to
rewrite the Priority A or Priority B channel to the selected
channel.
MR-CH 1/2/3/4 KEYS CH1/CH2/CH3/CH4
Push to select an operating channel directly.
MONI (AUDI) KEY MON
Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while push-
ing this key. (LMR operation only)
Activates one of (or two of) the following functions on each
channel independently: (PMR or BIIS PMR operation only)
Push and hold to un-mute the channel (audio is emitted; Audible
condition).
Push to mute the channel (sets to Inaudible only).
Push to un-mute the channel (sets to Audible only).
Push after the communication is nished to send a reset code.
NOTE: The un-mute condition (Audible condition) may
automatically return to the mute condition (Inaudible con-
dition) after a specied period depending on programming.
LIGHT KEY LIGT
Push to turn the transceivers backlight ON temporarily only
when the backlight function is turned OFF in user set mode.
LOCK KEY LOCK
Push and hold for 1 sec. to electronically lock all program-
mable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency].
Push and hold for 1 sec. again to turn the lock function OFF.
HIGH/LOW KEY H/L
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
Ask your dealer for the output power level for each selection.
C.TONE CH ENT KEY TSEL
Push to select the continuous tone channel using [CH Up]/
[CH Down] to change the tone frequency/code setting. The
selected channel remains set as the continuous tone chan-
nel until another channel is designated as such.
TALK AROUND KEY TA
Push to turn the talk around function ON and OFF.
The talk around function equalizes the transmit frequency to the
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY W/N
Push to toggle the IF bandwidth between wide and narrow.
The wide passband width can be selected from 25.0 or 20.0 kHz
using the CS-F70/F1700
CLONING SOFTWARE
. (PMR or BIIS PMR
operation only) Ask your Dealer for details.
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 8 (1,1)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F80T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F80T in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info