670361
9
Zoom out
Zoom in
Previous page
1/48
Next page
5
2
PANEL DESCRIPTION
2
o 10-KEYPAD (IC-F70DT/F70T or IC-F80DT/F80T only)
The keypad allows you to enter digits to:
Select memory channels, tone channels and DTMF codes (dur-
ing transmission).
Set TX codes and BIIS status number.
Input text message for SDM operation.
Start up with a password.
Input the Individual ID code for digital operation.
!0 MONITOR SWITCH
Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while
pushing and holding this key. (LMR operation only)
Activates one of (or two of) the following functions on
each channel independently.
(PMR or BIIS PMR operation only)
Push and hold the key to unmute the channel (audio is
emitted; audible condition).
Push the key to toggle the mute and unmute conditions
(toggles audible and inaudible).
Push the key to mute the channel (sets to inaudible only).
Push the key to unmute the channel (sets to audible only).
Push the key after communication is nished to send a reset
code.
Push the key after communication is nished to send a clear
down code during BIIS operation on a BIIS channel.
NOTE: The unmute condition (audible conditions)
may automatically return to the mute condition
(inaudible condition) after a specied period.
Desired function can be programmed by your dealer. (p. 7)
!1 PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
Push to transmit the call during BIIS operation, depend-
ing on the setting.
!2 UP/DOWN SWITCHES
Push to select an operating channel.
Push to select a TX code channel after pushing
[TX CODE CH SELECT].
Push to select a DTMF channel after pushing [DTMF].
Push to select a scan group after pushing and holding
[SCAN].
Push to select a BIIS code, status number or SDM
(Short Data Message) after pushing [DIGITAL].
Desired functions can be programmed independently by your
dealer. (p. 7)
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 5 (1,1)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F70S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F70S in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info