Manual Icom IC-F70DS (page 19 of 48) (English)

670359

Zoom out

Zoom in

1/48

BASIC OPERATION

D TX code number edit

(PMR or BIIS PMR operation only)

If the transceiver has [TX Code CH Select] or [TX Code

Enter] assigned to it, TX code contents can be edited within

the allowable digits.

USING [TX CODE CH SELECT] KEY:

q Push [TX Code CH Select] to enter the TX code channel

selection mode.

• Select the desired channel before entering the TX code channel

selection mode if necessary.

w Push and hold [TX Code CH Select] for 1 sec. to enter the

TX code edit mode.

e Push [TX Code CH Select] to select the desired digit to be

edited.

• The digit to be edited blinks.

r Push [CH Up], [CH Down] or 10-keypad* to set the desired

digit.

t Push [TX Code CH Select] to set the digit. The digit to the

right will blink automatically.

• When the 10-keypad* is used for setting, the digit to the right will

blink automatically without pushing [TX Code CH Select].

y Repeat r and t to input all allowable digits.

u Push [Call] or [PTT] to transmit the edited TX code.

*IC-F70DT/T or IC-F80DT/T only

USING [TX CODE ENTER] KEY:

q Select the desired TX code channel via [TX Code CH

Select]+[CH Up] or [CH Down], [TX Code CH Up] or [TX

Code CH Down].

w Push [TX Code Enter] to enter the TX code edit mode.

e Push [TX Code Enter] to select the desired digit to be edit-

ed.

• The digit to be edited blinks.

r Push [CH Up], [CH Down] or 10-keypad* to set the desired

digit.

t Push [TX Code Enter] to set the digit. The digit to the right

will blink automatically.

• When the 10-keypad* is used for setting, the digit to the right will

blink automatically without pushing [TX Code CH Enter].

y Repeat r and t to input all allowable digits.

u Push [Call] or [PTT] to transmit the edited TX code.

*IC-F70DT/T or IC-F80DT/T only

IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 15 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F70DS in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F70DS Manual

Product: