670350
73
Zoom out
Zoom in
Previous page
1/117
Next page
7
dPMR™ OPERATION
7-13
D Receiving a Broadcast call
When an Emergency call is received:
• Beeps sound�
“RX Broadcast” and the calling station name (or ID)
are alternately displayed�
• “ ” blinks�
RX Broadcast
Call Scan
NOTE: Until receiving a Disconnect signal, the
transmission is disabled�
D Receiving an Emergency call
When an Emergency call is received:
• Beeps sound�
• RX Emergency” and the calling station name (or ID)
are alternately displayed�
” is displayed and Mute is released�
• “ ” may be displayed or blink, depending on the
presettings�
• The transceiver automatically transmits an
acknowledgement to the calling station�
RX Emergency
Call Scan
1� Hold down [PTT] to transmit
2� After the communication is finished, push [Back]�
The transceiver sends a Disconnect signal to terminate the
call�
” disappears, and “Clear Down” is displayed for
approximately 2 seconds, then the transceiver
returns to the Standby mode�
L Either station can send a Disconnect signal�
Receiving a call
D Receiving an Ambience Listening call
When an Ambience Listening call is received from
a specied station, the transceiver will automatically
transmit its microphone audio�
NOTE: If the transceiver receives an Ambience
Listening command from a station other than the
specied one, the call will be ignored, and the
transceiver will not transmit its microphone audio�
D Receiving a Stun, Kill or Revive
If a Stun or Kill command is received, the transceiver
will display “Deactivated” and you cannot receive or
transmit�*
Deactivated
If a Stun command is received, you cannot operate
the transceiver until a Revive command is received, or
the password is input�
If a Kill command is received, you cannot operate the
transceiver until it is reprogrammed�
NOTE: Depending on the presetting, the transceiver
can ignore the Stun, Revive and Kill commands that
are from a non-specied station.
* Depending on the presetting, reception may be enabled�
Previous view
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F62D dPMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F62D dPMR in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info