670350
18
Zoom out
Zoom in
Previous page
1/117
Next page
2
PANEL DESCRIPTION
2-11
Category: Signaling/Call
Call
In the Analog mode
Push to make a call to the preset destination in the
channel�
Call A/Call B
In the Analog mode
Push to transmit a preset 2/5-Tone code or BIIS Call
Setup to the preset destination�
In the Digital mode
Push to transmit a Call Setup to the preset
destination�
Re-dial
Push to send the last transmitted DTMF code number
L Redial will be cleared when the transceiver is turned OFF
once�
Call List Select
1� Push to display the “Call List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an ID
name (or ID code)
3� After selecting, push [OK] to set, and return to the
Standby mode�
Call Menu
1� Push to display the “Call Menu” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an ID
name (or ID code)
3� After selecting, push [OK] to set, and display the
call function screen�
4� Push [P1 (Down)] or [P2 (Up)] to select a call
function�
L See ‘Transmitting a call’ on Sections 7 and 8 for
details�
5� After selecting, push [PTT] to make a call to the
selected station or group
DTMF Autodial
z Push to display the “DTMF Autodial” screen� Then,
push [P1 (Down)] or [P2 (Up)] to select a DTMF
code� After selecting, push [PTT] to transmit the
selected DTMF code�
z While in the Standby mode, hold down for 1 second
to transmit the currently selected DTMF code�
Emergency
1� Hold down during the Emer SW ON Timer period
to enter the Emergency mode�
2� After the Reminder Timer period has passed, an
Emergency call is automatically transmitted once,
or repeatedly
NOTE:
• Set the related settings using the programming
software�
• This key function is assignable to only [Emer] or
[Ext� Emer]�
L Hold down during the Emer SW OFF Timer
period to cancel the Emergency function, before
transmitting an Emergency call�
Telephone
In the Digital mode (dPMR Trunking only)
1� Push to display the “Phone List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a phone
number�
3� Push [OK] to connect to the telephone network�
Individual
1� Push to display the “Individual ID” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an
Individual ID name (or ID code)�
3� Push [OK] to set�
Group
1� Push to display the “Group ID” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select an Group
ID name (or ID code)�
3� Push [OK] to set�
Status
1� Push to display the “Status List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a Status
message�
3� Push [PTT] to send the message to the currently
selected station or group, or push [OK] to set�
L See pages 7-5 and 8-4 for details�
Message
1� While in the Standby mode, push to display the
Message List” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a
message�
3� Push [PTT] to send the message to the currently
selected station or group
L See pages 7-6 and 8-5 for details�
Write Message
1� Push to display the “Write Message” screen�
2� Write a message�
3� Push [PTT] to send the message to the currently
selected station or group
L See pages 7-7 and 8-6 for details�
Assignable Software key functions
Previous view
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F62D dPMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F62D dPMR in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info