Manual Icom IC-F610 (MPT Trunking) (page 11 of 36) (English)

12530

Zoom out

Zoom in

1/36

OPERATION

‘‘

General

Push to turn the power ON. A power-up alert tone will be

heard. Push again to turn the power OFF. The following

information will sequentially appear on the display.

Opening text

The pre-programmed opening text and individual ID will

appear.

The individual ID consisting of a preﬁx code (3 digits) + a

ﬂeet code (2 digits)+ an individual code (2 or 3 digits) will

appear.

(e.g.) If the preﬁx code is 200, the ﬂeet code 2001, and the

individual code 300, the individual ID will be ‘2002001300’.

• If you are within the trunking service area, the code

(selected by [ ]/[ ]) and the received signal strength,

are displayed to indicate that communication is possible.

*In the “-TEXT-” part, the characters pre-programmed by

cloning software will be displayed.

• If you are outside of the trunking service area, or if the

system is down, will blink.

At this time, the transceiver is searching for any available

system-controlled channel.

‘‘

Calling

Making a call with a memory Dial Number

Using [ ]/[ ], select one of the group codes that is

stored in the memory.

[ ]/[ ] allows you to select any group code from the 40

dial numbers.

q Select the desired dial number by pushing [ ] or [ ].

w Push [PTT] to make a call with the selected dial num-

ber.

e With ‘Calling’ displayed, the intermittent beep sound for

calling will be heard.

r With ‘Connected’ displayed, the speaker icon will appear

allowing you to start the communication. At the same

time, the count-down timer will appear to limit the com-

munication time.

(OPENING TEXT)

201 2001 300

-TEXT-

CALLING

CONNECTED

IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 11 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F610 (MPT Trunking) in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F610 (MPT Trunking) Manual

Product: