12530
7
Zoom out
Zoom in
Previous page
1/36
Next page
2
1
PANEL DESCRIPTION
t MEMORY DOWN (RIGHT DOWN) KEY* [ ]
If the stored calls are displayed by pushing the Call Back
key, this key scrolls down the screen.
While entering the dial number via the optional microphone
keypad, push the key to delete the last digit as a backspace
key.
y CLEAR KEY* [Clear/P
4]
If this key is pushed during a call, the call is finished.
If the key is push and held down for 2.5 sec., the User
Setup Menu appears (or the user setup menu is cancelled).
Pushing the key to cancel any keypad operation, and return
to normal mode.
u CALL BACK KEY* [Call Back/P
3]
Pushing this key will display the stored calls that you have
not answered yet.
Pushing the key again will return to the standby mode.
Push and hold the key for 2.5 sec., the Call Back mode
turns ON or OFF. While the Call Back mode is turned ON,
received calls are stored in the LOG, then the Call Back
message is automatically sent back to the called station.
i MODE KEY* [Mode/P
2]
Push to toggle the mode between MPT and convention.
o EMERGENCY KEY* [Emergency/P
1]
Push and hold for 2.5 sec. to initiate an Emergency Call(9)
to the pre-determined station or current station (Selectable
Emergency Function; p. 11).
!0 DESPATCHER KEY* [Despatcher/P
0]
Pushing the key will display the screen in the Despatcher
mode.
Pushing the key again will display a status code (if permit-
ted by the settings).
Pushing the key again will go to the standby mode.
!1 POWER SWITCH [POWER]
Push to turn the power ON and OFF.
• The following functions are available at power ON as options:
- Password prompt
!2MICROPHONE CONNECTOR
Connect the supplied microphone, or optional DTMF micro-
phone for dialing operation via the keypad.
MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.
The following functions are available when the micro-
phone is on or off hook:
- hook off: Answer
- hook on: Clear Down
*Programmable function keys and default key assignment.
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 7 (1,1)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F610 (MPT Trunking) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F610 (MPT Trunking) in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info