670356
175
Zoom out
Zoom in
Previous page
1/182
Next page
14
OPTIONS
14-3
HM-222 speaker microphone (for the Portable type transceiver)
Belt clip
Turn OFF the transceiver
before attaching or
detaching the microphone
NOTE:
NEVER immerse the connector in water. If the
connector becomes wet, be sure to dry it BEFORE
attaching to the transceiver.
The microphone element is located at the top
left of the speaker microphone, as shown in the
illustration above. To maximize the readability
of your transmitted audio, hold the microphone
approximately 5 to 10 cm (2 to 4 inches) from your
mouth, and then speak at your normal voice level.
D Attaching
Attach the connector of the speaker microphone to
the multi connector on the transceiver and tighten the
screw.
[PTT]
[Emer]
Speaker
Microphone
Earphone jack
Turn OFF
Screw
Coin
CAUTION: Firmly attach to the multi
connector, but do not overtighten.
A loose connection will allow
water intrusion into the connector.
An overtightened connection will
damage the connector pins on the
transceiver.
NOTE: KEEP the connector cover attached to the
transceiver when the speaker microphone is not in use.
Water will not get into the transceiver, even if the
cover is not attached. However, the terminals (pins)
will become rusty, or the transceiver will function
abnormally if the connector becomes wet.
You can connect
an earphone (user
supplied) to the
earphone jack on
the microphone.
Previous view
175


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F5400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F5400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info