670349
25
Zoom out
Zoom in
Previous page
1/117
Next page
3
BASIC OPERATION
3-5
D Rewriting the Priority A or B channel
(Menu > Channel/Scan > Prio A (RW))
(Menu > Channel/Scan > Prio B (RW))
1� Select a channel to be set as the Priority A or B
channel. (p. 3-4)
2� Push [Menu] to display the “Menu” screen.
3� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then
push [OK]�
Channel/Scan
Signaling/Call
Menu
4� Push [P2 (Up)] or [P1 (Down)] to select “Prio A
(RW)” or “Prio B (RW)” and push [OK].
Priority A CH
Prio A (RW)
Channel/Scan
5� After a dialog is displayed, as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
dialog, then push [OK].
R Are u Sure?
Cancel
OK
Prio A (RW)
“Prio A (RW)” is briey displayed.
• Sets the selected channel as the Priority A or B
channel�
6� Hold down [Back] for 1 second to return to the
standby screen�
TIP: Hold down [Prio A (Rewrite)] or
[Prio B (Rewrite)] for 1 second to set the currently
selected channel as the Priority A or B channel�
D Selecting a Continuous tone channel
(Menu > Channel/Scan > C.Tone CH Sel)
1� While in the Analog mode, push [Menu] to display
the “Menu” screen.
2� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then
push [OK]�
Channel/Scan
Signaling/Call
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “C.Tone
CH Sel,” then
push [OK]�
C.Tone CH Sel
Compander
Channel/Scan
4� Push [P2 (Up)] or [P1 (Down)] to select a
Continuous tone channel, then push [OK].
1
2
C�Tone CH Sel
C.Tone CH Sel
2
The selected Continuous tone channel is briey
displayed and set�
5� Hold down [Back] for 1 second to return to the
standby screen�
TIP: While in the Analog mode, push
[C�Tone CH Select] to directly display the “C�Tone
CH Sel” screen in step 4 above�
Selecting a channel
Previous view
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F52D dPMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F52D dPMR in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info