670349
17
Zoom out
Zoom in
Previous page
1/117
Next page
2
PANEL DESCRIPTION
2-10
Category: Channel/Scan (Voting) (Continued)
Scan Add/Del (Tag)
z Push to add a channel to, or delete it from the
current Scan list�
When a channel is added to the current Scan list, the
current Scan list text and “ON” are briey displayed.
When a channel is deleted from the current Scan
list, the current Scan list text and “OFF” are briey
displayed�
z You can add a channel to, or delete it from a
selected Scan list�
1� Hold down for 1 second to display the “Scan Tag”
screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a list�
3� Push [OK] to add a channel to, or delete it from
the selected list�
When a channel is added to the selected Scan
list, the current Scan list text and “ON” are briey
displayed�
When a channel is deleted from the selected Scan
list, the current Scan list text and “OFF” are briey
displayed�
4� Push [Back] to exit the “Scan Tag” screen�
z While a scan is paused by detecting a signal on
a channel (except for a primary or secondary
channel), push this key to remove the channel from
the Scan list�
TIP: When the Nuisance Delete function is ON,
the removed channel is automatically added to the
Scan list again, after the scan is canceled�
High/Low
Push to select the transmit output power level
temporarily or permanently, depending on the
presetting�
C.Tone CH Select
In the Analog mode
Push to display the “C�Tone CH Select” screen�
Then push [P1 (Down)] or [P2 (Up)] to select a tone
frequency or code� After selecting, push [OK] to save�
Tone/CC CH Select
In the Analog mode
1� Push to display the “C�Tone CH Select” screen�
2�
Push
[P1 (Down)] or [P2 (Up)]
to select a tone
frequency or code�
3� Push [OK] to save
In the Digital mode (Conventional only)
1� Push to display the “CC CH Select” screen�
2� Push [P1 (Down)] or [P2 (Up)] to select a CC�
3� Push [OK] to save
Monitor
z Push to turn the CTCSS (DTCS), 2-Tone, or 5-Tone
squelch mute ON or OFF
L Only during 2-Tone mode operation, push to open any
squelch, or deactivate any mute functions�
L Only during 5-Tone mode operation, push to activate
one or two of the following functions on each channel
(Depending on the presetting):
- Hold down to unmute the channel (Audible mode)�
- Push to mute the channel (Inaudible mode)�
NOTE: The audible (unmuted) mode may
automatically return to the Inaudible (muted)
mode, after the preset period of time�
z Depending on the presetting, holding down this key
for 1 second may cancel the Scan�
Talk Around
Push to turn the Talk Around function ON or OFF
L The Talk Around function equalizes the transmit
frequency to the receive frequency, for direct (Simplex)
communication�
Bandwidth
In the Analog mode
Push to temporarily set the channel width to Wide* or
Narrow
L The wide passband width can be preset to either 25�0
kHz (Wide) or 20�0 kHz (Mid)�
Depending on the presetting, Mid channel width may be
selectable�
* The Wide channel width cannot be used in the USA
version transceivers�
Scrambler
In the Analog mode
Push to turn the Voice Scrambler function ON or OFF
L The Voice Scrambler function provides private
communication between stations by using a scrambled
code�
In the Digital mode
Push to turn the Voice Scrambler function ON or OFF
L The Voice or Data Scrambler function provides private
communication between stations by using an Scrambler
Key and Key ID�
Compander
In the Analog mode
Push to turn the Compander function ON or OFF
L The Compander function reduces noise components on
the transmit audio to provide clear communication�
Assignable Software key functions
Previous view
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F52D dPMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F52D dPMR in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info