12528

Icom IC-F521 F621 EX(BIIS) Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
4
1
PANEL DESCRIPTION
New2001
■ Programmable function keys
The following functions can be assigned to [P0], [P1], [P2],
[P3], [P4], [
YY
], [
ZZ
], [ ] and [] programmable function
keys.
Consult your Icom Dealer or System operator for details con-
cerning your transceivers programming.
In the following explanations, programmable function names
are bracketed, the specific switch used to activate the func-
tion depends on programming.
[CH UP], [CH DN]
CH UP AND DOWN KEYS
• Select an operating channel.
• Select a transmit code channel after pushing the [TX
CODE CH] key.
• Select a DTMF channel after pushing the [DTMF] key.
• Select a scan group while pushing and holding the
[Scan A/B] key.
[BANK] BANK KEY
Select and determine a bank number.
• Push [BANK] then push [CH UP]/[CH DN] to select oper-
ating bank number, and then push [BANK] to determine
the bank number.
[PRIO A], [PRIO A (Rewrite)], [PRIO B]
PRIORITY CHANNEL KEYS
➥
Select Priority A or Priority B channel with each push.
➥ Push and hold [Prio A (Rewrite)] to program the pri-
ority channel.
[MR-CH1], [MR-CH2], [MR-CH3], [MR-CH4]
OPERATING CHANNEL KEYS
Select an operating channel directly.
[SCAN A], [SCAN B]
SCAN START/STOP KEYS
➥ Push this key to start scanning; and push again to
stop.
NOTE: Place the microphone on hook to start
scanning.
Take the microphone off hook to stop scanning.
➥ Push and hold this key to indicate the scan group,
then push to select the desired group.
[SCAN Add/Del(Tag)]
SCAN TAG KEY
Adds or deletes the selected channel to the scan
group.
[High/Low]
OUTPUT POWER SELECTION KEYS
Select the transmit output power temporarily or perma-
nently depending on the pre-setting.
• Ask your Dealer or System Operator for the output power
level for each selection.
[TA] TALK AROUND KEY
Turns the talk around function ON and OFF.
• The talk around function equalises the transmit frequency
to the receive frequency for mobile-to-mobile communi-
cation.
IC-F521 Series_BIIS-2.qxd 05.10.26 11:30 AM Page 4 (1,1)
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F521 F621 EX(BIIS) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F521 F621 EX(BIIS) in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info