Manual Icom IC-F521 F621 EX(BIIS) (page 3 of 36) (English)

12528

Zoom out

Zoom in

1/36

New2001

DO NOT use or place the transceiver in areas with tem-

peratures below –22°F (–30°C) or above +140°F (+60°C) or,

in areas subject to direct sunlight, such as the dashboard.

AVOID operating the transceiver without running the vehi-

cle’s engine. The vehicle’s battery will quickly run out if the

transceiver is in transmission while the vehicle’s engine OFF.

AVOID placing the transceiver in excessively dusty envi-

ronments.

AVOID placing the transceiver against walls. This will ob-

struct heat dissipation.

AVOID the use of chemical agents such as benzine or al-

cohol when cleaning, as they damage the transceiver sur-

faces.

BE CAREFUL! The transceiver will become hot when

operating continuously for long periods.

For U.S.A. only

CAUTION: Changes or modiﬁcations to this transceiver, not

expressly approved by Icom Inc., could void your authority to

operate this transceiver under FCC regulations.

TABLE OF CONTENTS

IMPORTANT .................................................................................................... i

EXPLICIT DEFINITIONS ................................................................................. i

PRECAUTION ................................................................................................. i

TABLE OF CONTENTS .................................................................................. ii

1 PANEL DESCRIPTION .......................................................................... 1–7

■ Front panel ............................................................................................ 1

■ Function display ..................................................................................... 3

■ Programmable function keys ................................................................. 4

2 OPERATION ......................................................................................... 8–10

■ Turning power ON ................................................................................. 8

■ Channel selection .................................................................................. 8

■ Receiving and transmitting .................................................................... 9

3 BIIS OPERATION ............................................................................... 11–22

■ Default setting ...................................................................................... 11

■ Receiving a call .................................................................................... 11

■ Transmitting a call ................................................................................ 13

■ Receiving a message .......................................................................... 15

■ Transmitting a status ........................................................................... 17

■ Transmitting an SDM ........................................................................... 18

■ Position data transmission ................................................................... 20

■ Printer connection ................................................................................ 20

■ PC connection ..................................................................................... 20

■ Digital ANI ............................................................................................ 20

■ Auto emergency transmission ............................................................. 21

■ Stun function ........................................................................................ 21

■ BIIS indication ...................................................................................... 21

■ Horn output .......................................................................................... 21

■ Priority A channel selection .................................................................. 22

4 SmarTrunk II™ OPERATION ............................................................ 23–24

■ SmarTrunk II™ and conventional modes ............................................ 23

■ SmarTrunk II™ operation .................................................................... 23

5 CONNECTION AND INSTALLATION ................................................ 25–30

■ Rear panel description and connection ............................................... 25

■ Supplied accessories ........................................................................... 26

■ Mounting the transceiver ...................................................................... 27

■ Optional unit installation ...................................................................... 28

■ Antenna ................................................................................................ 30

■ Fuse replacement ................................................................................ 30

■ Cleaning .............................................................................................. 30

6 OPTIONS .................................................................................................. 31

7 SAFETY TRAINING INFORMATION ....................................................... 32

IC-F521 Series_BIIS-2.qxd 05.10.26 11:30 AM Page ii (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F521 F621 EX(BIIS) in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F521 F621 EX(BIIS) Manual

Product: