Manual Icom IC-F520 F620 EX(BIIS) (page 32 of 36) (English)

12524

Zoom out

Zoom in

1/36

5 CONNECTION AND INSTALLATION

UT-109/UT-110/UT-117S installation

Install the optional unit as below.

qTurn power off, then disconnect the DC power cable.

wUnscrew the 4 screws, then remove the bottom cover.

eCut the print patterns on the PCB at the transmit mic cir-

cuit (MIC) and receive AF circuit (AFO) as shown in the di-

agram below.

rInstall the unit as described in page 28.

tAttach the bottom cover and screws to their original posi-

tion, then connect the DC power cable.

NOTE: Be sure to re-solder above print

patterns, when you remove the scrambler

unit. Otherwise no TX modulation or AF

output is available.

OPC-617/822 installation

Either the optional OPC-617

ACC CABLE

or OPC-822

INTER

FACE CABLE

can be installed.

Install the OPC-617 or OPC-822 as shown bellow.

OPC-617

OPC-822

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F520 F620 EX(BIIS) in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F520 F620 EX(BIIS) Manual

Product: