Manual Icom IC-F510 F610 EU(BIIS) (page 24 of 36) (English)

12522

Zoom out

Zoom in

1/36

3 BIIS OPERATION

New2001

■ Auto emergency transmission

When [EMER (Silent)] is pushed, an emergency signal is au-

tomatically transmitted for the speciﬁed time period.

The status 22 (Emergency) is sent to the selected ID station,

and the position data is transmitted after the emergency sig-

nal when a GPS receiver is connected to the transceiver.

The emergency transmission is performed on the emergency

channel, however, when no emergency channel is speciﬁed,

the signal is transmitted on the previously selected channel.

There is no change in the function display or beep emission

during automatic emergency transmission.

■ Stun function

When the speciﬁed ID, set as a killer ID, is received, the stun

function is activated.

When the killer ID is received, the transceiver switches to the

passcode required condition. Entering of the passcode via the

keypad is necessary to operate the transceiver again in this

case.

■ BIIS indication

The following indications are available for the BIIS operation

on an MSK channel.

: Individual/group call is successful.

: Message (status or SDM) transmission is

successful.

: No answer back is received.

: Appears during retry of the call (2nd call).

: The call is cancelled for some reason.

: Called station is in busy.

■ Horn output

An automatic horn sounding function is available when the

optional OPC-617

ACC CABLE

is connected. When a status

message is received, the transceiver controls the vehicles

horn for the speciﬁed time period to inform you that a status

message is received.

This function is convenient when the operator away from the

transceiver or vehicle.

Ask your dealer or system operator for connection and set-

ting details.

IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 21 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F510 F610 EU(BIIS) in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F510 F610 EU(BIIS) Manual

Product: