12506
22
Zoom out
Zoom in
Previous page
1/32
Next page
18
7
OPTIONAL UNIT INSTALLATION
UT-113 installation
Install the optional UT-113
MAN DOWN UNIT
as follows:
q Rotate [VOL] to turn the power OFF, and remove the bat-
tery pack. (p. 2)
w Remove the unit cover.
NOTE: Use a at head screw driver or a similar at instrument,
and insert into the hollow of the chassis, then lift and take away
the unit cover. (The removed cover cannot be used again.)
e Install the unit as shown below.
r Replace the unit cover and the battery pack, then rotate
[VOL] to turn the power ON.
UT-108 installation
Install the optional UT-108
DTMF DECODER UNIT
as follows:
q Rotate [VOL] to turn the power OFF, and remove the bat-
tery pack. (p. 2)
w Remove the unit cover as shown at left.
e Cut and solder the pattern on the PCB at the RX AF cir-
cuit as shown below.
r Install the UT-108
DTMF DECODER UNIT
the same way as
described in the optional UT-113 installation as shown at left.
t Replace the unit cover and the battery pack, then rotate
[VOL] to turn the power ON.
NOTE: Be sure to un-solder A and B, and re-solder B and
C, otherwise no AF output is available when you remove
the DTMF decoder unit.
A
B
C
!IC-F43TR-1.qxd 04.3.17 9:21 AM Page 18 (1,1)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F43TR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F43TR in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info