12502
9
Zoom out
Zoom in
Previous page
1/48
Next page
6
2
PANEL DESCRIPTION
Programmable function keys
The desired key function can be assigned to the programma-
ble function keys ( , , or ) in following way.
q Select the desired operating mode (Analog or Digital), then
turn power OFF.
w While pushing and holding [Side3] (CH Down) and the
desired key ( , , or ) to be assigned, rotate
[VOL] to turn power ON.
• The selected function name is displayed for a moment.
The desired key function is assigned to the pushed key ( ,
, or
) in the selected operating mode.
e Turn power OFF.
r Repeat steps w and e until the desired key function is
selected.
Consult your Icom dealer or system operator for details con-
cerning [Top], [Side1], [Side2] and [Side3] programming.
D Usable functions
CH UP AND DOWN KEYS
Push to select an operating channel.
Push to select the desired CTCSS/DTCS tone after push-
ing [CODE]. (During Analog mode operation)
Push to select the desired Common ID after pushing
[CODE]. (During Digital mode operation)
Push to select a TX status message after pushing
[SELECT]. (During Digital channel operation)
Push to change the value or condition in user set mode.
Push to select the desired scan list from “SCAN 1” or
“ZONE” after pushing and holding [Scan A Start/Stop]/
[Scan B Start/Stop].
ZONE KEY
Push this key, then change the zone up or down using [CH
Up]/[CH Down].
What is “zone”?— The desired channels are assigned
into a zone according to the intended use for grouping. For
example, ‘Staff A’ and ‘Staff B’ are assigned into a
“Business” zone, and ‘John’ and ‘Cindy’ are assigned into a
“Private” zone.
2
*Information
Up to two desired functions, one each for Analog and Digital
operation mode, can be assigned to [Top], [Side1], [Side2],
[Side3], , , and keys.
The default setting is used in this instruction manual, for
description.
! IC-F4029SDR-3.qxd 06.7.4 5:53 PM Page 6 (1,1)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F4029SDR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F4029SDR in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info