670354
163
Zoom out
Zoom in
Previous page
1/182
Next page
12
USER SETTINGS
12-11
Setting the VOX gain level
<Key operation>
Portable: For the Non-display types
1. Turn OFF the transceiver.
2. Set [Selector] to Channel 16.
3. While holding down [F1] and [F2], turn ON the
transceiver. Continue holding down [F1] and [F2]
for about 3 seconds.
2 beeps sound.
The transceiver enters the VOX gain level Set mode.
4. Push [F2] to increase, or push [F3] to decrease
the gain level.
L The setable range is 1 (minimum) ~ 10 (maximum).
L A beep sounds after pushing [F2] or [F3]. An error
beep sounds if you try to exceed the setable range.
5. Turn OFF the transceiver, then turn it ON again to
exit the VOX gain level Set mode.
You can set the VOX gain level to between 1
(minimum) and 10 (maximum). Higher values make
the VOX function more sensitive to your voice.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
( Menu > Functions > VOX Gain)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Functions,” then
push [OK].
3. Push [Up] or [Down] to select “VOX Gain,” then
push [OK].
4. Push [Up] or [Down] to set the VOX gain level,
then push [OK].
L The setable range is 1 (minimum) ~ 10 (maximum).
5. Hold down [Back] for 1 second to return to the
standby screen.
[VOL]
[F1]
[F2]
[F3]
[Selector]
Mobile: For the Segment types
1. Turn OFF the transceiver.
2. While holding down [F2] and [F3], turn ON the
transceiver. Continue holding down [F2] and [F3]
for about 3 seconds.
2 beeps sound.
3. Hold down [F1] for 1 second to enter the Set
mode.
4. Push [F2] or [F3] to select the “A6” screen.
5. Push [Up] to increase, or push [Down] to decrease
the gain level.
L The setable range is 1 (minimum) ~ 10 (maximum).
L A beep sounds after pushing [Up] or [Down]. An error
beep sounds if you try to exceed the setable range.
6. Hold down [F1] for 1 second again to exit the Set
mode.
7. Turn OFF the transceiver, then turn it ON again to
normally operate it.
F1 F2 F3
[Up]
[Down][F1] [F2] [F3]
Power key
Previous view
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F3400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F3400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info