670354
139
Zoom out
Zoom in
Previous page
1/182
Next page
11
Bluetooth
®
OPERATION
11-4
Turning ON the Bluetooth
®
function (Continued)
NOTE: For the Portable Ten-key and the Simple
key types and Mobile LCD types
• To turn ON the Bluetooth
®
function: See page 11-3
• To pair with a headset: See page 11-6
• To pair with a data device: See page 11-9
Portable:
Step 1: Entering the Bluetooth
®
Set mode
(Transceiver)
1. Turn OFF the transceiver.
2. Set [Selector] to any channel other than Channel
16.
3. While holding down [F1], turn ON the transceiver.
Continue holding down [F1] for about 3 seconds.
2 beeps sound.
The transceiver enters the Bluetooth
®
Set mode.
Step 2: Entering the Pairing mode
(Bluetooth
®
device)
L See the Bluetooth
®
device’s instruction manual for
details.
Step 3: Turning ON the Bluetooth
®
function
(Transceiver)
After the headset has entered the Pairing mode, push
[F2] to turn ON the Bluetooth
®
function.
The transceiver automatically enters the Pairing mode, and
begins searching for a Bluetooth
®
headset.
While searching, the status indicator quickly blinks blue.
L If the status indicator does not blink after pushing [F2], the
transceiver has not entered the Bluetooth
®
Set mode. In
that case, do step 1 again.
Step 4: Pairing with a headset (Transceiver)
When a headset is found, the transceiver pairs with it.
After the transceiver and the headset pairing has
succeeded, the Status indicator slowly blinks blue 3 times.
In that case, the connection to the headset has also
succeeded.
LThetransceiversearchesforaheadsetrst.After
searching for a headset, the transceiver will start
searching for a data device. To skip searching for a data
device, push [PTT] on the headset.
L If the Bluetooth
®
connection fails, the Status indicator
slowly blinks red 3 times. To search for a headset again,
push [F3] to turn OFF the Bluetooth
®
function, then push
[F2] to turn it ON again.
This section describes how to turn ON the Bluetooth
®
function and start pairing using the Portable Non-
display types or Mobile Segment types.
[VOL]
[F1]
[F2]
[F3]
Step 5: Pairing with a data device (Transceiver)
1. When a data device is found, the transceiver pairs
with it.
After the transceiver and the data device pairing has
succeeded, the Status indicator slowly blinks blue 3
times. In that case, connection to the data device has
also succeeded.
L If the Bluetooth
®
connection fails, the Status indicator
slowly blinks red 3 times. To search for a data device
again, push [F3] to turn OFF the Bluetooth
®
function,
then push [F2] to turn it ON again. The transceiver
automatically tries to connect.
2. Turn OFF the transceiver, then turn it ON again to
exit the Bluetooth
®
Set mode.
D For the Portable Non-display types and Mobile Segment types
TIP: To turn OFF the Bluetooth
®
function, push [F3]
in the Bluetooth
®
Set mode.
Previous view
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F3400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F3400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info