670354
122
Zoom out
Zoom in
Previous page
1/182
Next page
9
ABOUT THE microSD CARD
9-4
Formatting the microSD card
Use the transceiver's built-in Format function
to format all microSD cards to be used with the
transceiver. This creates a special folder on the card
that you need for operations like loading the data.
Format all cards, including a brand new microSD card,
and even preformatted cards for PCs or other uses.
NOTE: Formatting a card deletes all its data. Before
formatting any used card, back up its data onto your
PC. (p. 9-7)
IMPORTANT: Even if you format the microSD
card, some data may remain in the card. When you
dispose the card, be sure to physically destroy it to
avoid unauthorized access to any data that remains.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > SD Card > SD Format)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “SD Card,” then
push [OK].
3. Push [Up] or [Down] to select “SD Format,” then
push [OK].
“Are you sure?” is displayed.
4. Push [Left] or [Right] to select <OK>, then push
[OK].
LTo cancel formatting, select <Cancel>.
After formatting, returns to the “SD Card” screen.
5. Hold down [Back] for 1 second to return to the
standby screen.
Unmounting the microSD card
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > SD Card > SD Unmount)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “SD Card,” then
push [OK].
3. Push [Up] or [Down] to select “SD Unmount,” then
push [OK].
“Are you sure?” is displayed.
4. Push [Left] or [Right] to select <OK>, then push
[OK].
LTo cancel unmounting, select <Cancel>.
After unmounting, returns to the “SD Card” screen.
5. Hold down [Back] for 1 second to return to the
standby screen.
6. Remove the card from the transceiver.
Before you remove a card when the transceiver is ON,
be sure to rst electrically unmount it, as shown below.
Otherwise the data may be corrupted or deleted.
TIP: For the Portable Non-Display types and
Mobile Segment types
Before removing a card, be sure to turn OFF the
transceiver.
Previous view
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F3400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F3400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info