670469
18
Zoom out
Zoom in
Previous page
1/23
Next page
5
16
dPMR™ OPEARTION
D Transmitting
You can make a call to a station that has the same
Common ID. Other digital mode transceivers on the
channel will not receive the call that does not match
their Common ID.
Before making a call, wait until the channel is clear to
avoid interference.
Using [PTT]:
1) Rotate [Rotary Selector] to select a channel.
2) Push [PTT] to call a station.
3) Hold down [PTT] and speak at your normal voice
level.
4) Release [PTT] to receive.
5) Push [Clear]* to send a ‘Disconnect’ signal to
terminate the call.
Using the [S-Ring/C-Ring]:
1) Rotate [Rotary Selector] to select a channel.
2) Hold down [S-Ring/C-Ring] for 1 second to call a
station.
3) Hold down [PTT] and speak at your normal voice
level.
4) Release [PTT] to receive.
5) Push [Clear]* to send a ‘Disconnect’ signal to
terminate the call.
Using the [Call]*:
1) Rotate [Rotary Selector] to select a channel.
2) Push [Call]* to send a call request.
3) Hold down [PTT] and speak at your normal voice
level.
4) Release [PTT] to receive.
5) Push [Clear]* to send a ‘Disconnect’ signal to
terminate the call.
Receiving and transmitting (Continued)
NOTE:
To insure the readability of your signal:
1. After pushing [PTT], pause briey before you start
speaking.
2. Hold the microphone 5 to 10 cm from your mouth,
and then speak at your normal voice level.
NOTE:
After receiving a call request, a ringer sounds on a
receive transceiver.
[Rotary Selector]
[PTT]
* Assign the function to a programmable key by
using the CS-F29DR cloning software (purchase
separately). Ask your dealer for details.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F29DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F29DR in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info