Manual Icom IC-F2821 D (page 26 of 36) (English)

464226

Zoom out

Zoom in

1/36

BIIS OPERATION

General

The short data message, SDM, can be sent to an individual

station or group stations. Also, 8 SDM memory channels are

available and the messages can be edited via PC program-

ming.

Transmitting an SDM

q While in the standby condition, push [P1] (Digital), then

push [Up] or [Down] or rotate [DIAL] to select the desired

station/group code.

w Push [P1] (Digital) again, then push [Up] or [Down] or

rotate [DIAL] to select the desired SDM.

Or, you can select the desired SDM using [Status Up]/

[Status Down] key directly.

e Push [P0] (Call) or [PTT]* to transmit the SDM to the

selected station/group.

*PTT call can be made only when PTT call capability is permitted.

•2 beeps will sound and the transceiver returns to the standby

condition automatically when the transmission is successful.

MESSAGE 1

SDM 1

SDM is displayed.

Appears

■ Transmitting an SDM (Short Data Message)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F2821 D in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F2821 D Manual

Product: