12474
14
Zoom out
Zoom in
Previous page
1/48
Next page
9
3
BASIC OPERATION
Receiving and transmitting
Prior to using the transceiver for the rst time, the battery pack
must be fully charged for optimum life and operation. (P. 24)
Receiving:
q Rotate [VOL] clockwise to turn power
ON.
w Rotate [CH selector] to select the de-
sired operating channel.
Set your group code number if required.
(pgs. 1316)
Scan starts automatically when channel
16 is selected. (p. 11)
e Listen for a transmission and adjust
[VOL] to a comfortable listening level.
The LED indicator turns green, when
the received signal contains the same
CTCSS tone or DTCS code.
When no transmission is heard, push
and hold [MONI] while adjusting [VOL].
r The transceiver is now set to receive desired calls on the se-
lected channel.
Transmitting:
Wait for the channel to become clear to avoid interference.
q While pushing and holding [PTT], speak into the microphone at
a normal voice level.
The LED indicator turns red.
w Release [PTT] to return to receive.
IMPORTANT!: To maximize the readability of your signal;
1. Pause briey after pushing [PTT].
2. Hold the microphone 5 to 10 cm from your lips, then speak
into the microphone at a normal voice level.
[VOL]
[CH selector]
Microphone
!IC-F25SR-0.qxd 06.10.5 6:31 PM Page 9 (1,1)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F25SR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F25SR in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info