Manual Icom IC-F22SR (page 19 of 36) (English)

12472

Zoom out

Zoom in

1/36

BASIC OPERATION

New master

‘‘

Setting the group code number

USING THE CTCSS TONE CODE

The transceiver is equipped with 52 CTCSS tones. (See next page)

CTCSS operation provides communication with silent standby since

you will only receive calls from group members using the same

CTCSS tone.

You can assign a different tone to CH 1 to CH 15 independently.

q While pushing and holding [PTT], [S-Ring/C-Ring], [MONI], turn

[VOL] to turn the power ON.

w Select the desired CH 1 to CH 15 that you want to assign the

CTCSS tone frequency to.

e Push and hold [S-Ring/C-Ring] until a beep (Pi) is emitted.

r Push [PTT] the necessary number of times to choose the 10 digit

of the desired code from the channel list.

t Push [S-Ring/C-Ring].

• Conﬁrmation beep is emitted. (See next page.)

y Push [PTT] the necessary number of times to choose the 1 digit

of the desired code from the frequency list.

u Push [S-Ring/C-Ring].

i Turn the power OFF, and then ON again.

[Example]

To assign tone code No. 28 as CH1;

q While pushing and holding [PTT], [S-Ring/C-Ring] and [MONI],

turn [VOL] to power ON.

w Select the CH 1, then push and hold [S-Ring/C-Ring] until a beep

(Pi) is emitted.

e Push [PTT] twice to choose the 10 digit of the desired channel.

r Push [S-Ring/C-Ring], then push [PTT] eight times to choose the

1 digit of the desired code.

t Push [S-Ring/C-Ring]. A long beep and 3 short beeps are emit-

ted.

y Turn the power OFF, and then ON again.

IC-F22SR_2.qxd 03.5.29 14:11 Page 19 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F22SR in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-F22SR Manual

Product: