12472
16
Zoom out
Zoom in
Previous page
1/36
Next page
11
3
BASIC OPERATION
New master
Receiving and transmitting
CHARGE the battery pack before rst operating the transceiver.
The transceiver has been pre-programmed with all the PMR fre-
quency channels and CTCSS tone
codes as a default. The CTCSS tone
number can be changed if required.
Receiving:
q Rotate the [VOL] knob clockwise to
turn the power ON.
w Rotate the [CH] selector to select the
desired operating channel.
Setting the your group code number
if required. (pgs. 1416)
e Listen for a transmission and adjust
[VOL] to a comfortable listening level.
[LED] turns to green, when the re-
ceived signal contains same CTCSS
or DTCS code number.
When no transmission is heard,
push and hold [MONI] while adjust-
ing [VOL].
The transceiver is now set to receive desired calls on the selected
channel.
Transmitting:
Wait for the channel to become clear to avoid interference.
r While pushing and holding [PTT], speak into the microphone at a
normal voice level.
[LED] turns to red.
t Release [PTT] to return to receive.
*IMPORTANT: To maximize the readability of your transmitted sig-
nal, pause a few sec. after pushing [PTT], hold the microphone 10
to 15 cm from your mouth and speak at a normal voice level.
[S-Ring
/C-Ring]
[PTT]
[MONI]
[VOL
/POWER]
[CH selector]
*microphone
IC-F22SR_2.qxd 03.5.29 14:11 Page 16 (1,1)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F22SR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F22SR in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info