12468
8
Zoom out
Zoom in
Previous page
1/22
Next page
4
1
PANEL DESCRIPTION
the following:
[CALL] (incl. CAL A and CAL B), [MONI] and [EMER] keys.
OUTPUT POWER SELECTION KEYS
Select the transmit output power temporarily or per-
manently, depending on the pre-setting.
Ask your dealer or system operator for the output power
level for each selection.
BEEP KEY
Push to toggle beep tones on and off.
These are the conrmation beep tones that by default are
emitted each time a key is pushed.
LIGHT KEY
Push to select the keypad and LCD backlighting
condition.
ON : Turns backlighting on continously.
OFF : Turns backlighting off.
AUTO : Turns backlighting on or off depending on the ACC
socket pin 1 voltage.
ON: low (0 V) OFF: high (12 V)
CONTINUOUS TONE CHANNEL ENTRY KEY
Push this key, then input a continous tone memory
channel number via the keypad to change the tone
frequency.
TALK AROUND KEY
Toggles the talk around function on and off.
The talk around function equalizes the transmit frequency
to the receive frequency for mobile-to-mobile communi-
cation.
WIDE/NARROW KEY
Push [W/N] to toggle the bandwidth between wide
and narrow operation.
This function is available for wide/narrow transceiver versions only.
DTMF CHANNEL SELECT KEY
Push this key to select a DTMF channel.
Push this key, then select the desired DTMF channel
using the [CH UP]/[CH DN] keys.
Push and hold this key to transmit the selected DTMF
code.
CALL KEYS
Transmit a 5-tone call.
Call transmission is necessary before you call another
station, depending on your signalling system.
The [CAL A] and/or [CAL B] keys may be available when
your system employs selective Individual/Group calls.
Ask your system operator which call is assigned to each
key.
LOW1
LOW2
BEEP
LITE
TONE
TA
W/N
DTMF
CALL
CAL A
CAL B
IC-F1610_F2610.qxd 03.3.7 16:29 Page 4 (1,1)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F1610 F2610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F1610 F2610 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info