12434
78
Zoom out
Zoom in
Previous page
1/98
Next page
73
9
OTHER FUNCTIONS
Tone scan
The transceiver can detect the subaudible tone frequency and
DTCS code in a received signal. By monitoring a signal that
is being transmitted on a repeater input frequency, you can
determine the tone frequency required to access the repeater.
q Set the desired frequency or memory channel to be
checked for a tone frequency or DTCS code.
w Push [2 TONE] for 1 sec. one or more times to activate the
repeater tone, tone squelch or DTCS squelch. (T, T SQL
or DTCS)
Rotating [DIAL] while pushing [2 TONE] also selects the tone
functions.
e Push [7 T.SCAN] for 1 sec. to start the tone scan.
To change the scanning direction, rotate [DIAL].
r When the tone frequency or DTCS code is decoded, the
set mode contents are programmed with the frequency or
code.
The tone scan pauses approx. 10 sec. when a tone frequency or
DTCS code is detected.
The decoded tone frequency is used for the repeater tone fre-
quency when the tone squelch or DTCS squelch is OFF.
The decoded tone frequency is used for the tone squelch fre-
quency when the tone squelch is ON.
The decoded DTCS code is used for the DTCS code when the
DTCS squelch is ON.
•“CT, rT or CD appears according to the tone setting.
t Push [VFO] to stop the scan.
If the scan is cancelled before the transceiver detects the tone
or code, the set mode contents are not changed.
[DIAL]
[VFO]
[2 TONE]
[7 T.SCAN]
Tone scan for tone squelch
Tone scan for repeater tone
Tone scan for DTCS squelch
Flashes while scanning.
Flashes while scanning.
IC-E90-1.qxd 02.7.4 05:16 PM Page 73 (1,1)
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-E90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-E90 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info