Manual Icom IC-E7 (page 66 of 96) (English)

12432

Zoom out

Zoom in

1/96

SET MODE

Dial select step

Select the tuning step while pushing and

holding [FUNC] from 100 kHz, 1 MHz (de-

fault) and 10 MHz.

Offset frequency

Sets the offset frequency for duplex (re-

peater) operation for each frequency band in-

dependently within 0 to 159.995 MHz range.

During duplex operation (–DUP or +DUP),

the offset frequency shifts the transmit fre-

quency (or while [SQL] (

ATT

•

SET

) is pushed).

The default value may differ according to the selected fre-

quency band (before accessing set mode) and transceiver ver-

sion.

The selected tuning step in VFO mode is used for setting

the offset frequency.

Tone selection

Sets the tone encoder, tone squelch or DTCS

squelch operation and pocket beep capabil-

ity, when waiting for the desired signal.

• OFF : Regular noise squelch operation. (default)

•TONE : Using tone encoder. Some repeaters require

subaudible tones to be accessed.

• TSQL : Using tone squelch. The squelch opens only

when a signal with matched subaudible tone is

received.

•PBEEP : In addition to the “TSQL” setting, alert beeps

will sound when a signal with matched tone is

received.

• DTCS : Using DTCS squelch. The squelch opens only

when a signal with matched DTCS code is re-

ceived.

•PDTCS: In addition to the “DTCS” setting, alert beeps

will sound when a signal with matched DTCS

code is received.

The subaudible tone frequency and DTCS code are pro-

grammed as the tone frequency and DTCS code items, re-

spectively.

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

DTCS squelch operationTone squelch operation

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

ATT

DTCS

TSQL

WFMAM

DUP

LOW

VOL PRIOP S KIP

1 MHz step 100 kHz step

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-E7 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-E7 Manual

Product: