Manual Icom IC-E208 (page 72 of 92) (English)

12430

Zoom out

Zoom in

1/92

11 OTHER FUNCTIONS

DTCS code

Sets DTCS code (both encoder and decoder) for DTCS

squelch operation. Total of 104 codes are available.

(default: 023)

DTCS polarity

Sets DTCS polarities for transmission and reception from

“NN,” “NR,” “RN” and “RR.” (default: NN)

Offset frequency

Sets the duplex offset frequency within 0 to 20 MHz range.

During duplex (repeater) operation, transmit frequency shifts

the set frequency.

(default value may differ depending on operating

frequency band and versions)

Tuning step

Selects tuning step from 5, 10, 12.5, 15, 20, 25, 30. 50, 100

and 200 kHz for [DIAL] or [Y]/[Z] operation.

(default value may

differ depending on operating frequency band and versions)

• Transmit : normal

Receive : normal

(default)

• Transmit : normal

Receive : reverse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-E208 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-E208 Manual

Product: