17
5
SCAN OPERATION
■ Weather channel scan
(U.S.A. version only)
q Push , then push [ENT•WX] to select a weather chan-
nel.
w Set squelch to the point where noise is just muted.
e Push , then push [ANL•
SCAN] to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•DEL
].
■ “TAG” channel setting
Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans respec-
tively. The “TAG” channel function is only available during
scan operation.
q Push [MR•
MW] to select memory mode; or, push , then
push [ENT•
WX] to select a weather channel.*
w Select the desired memory channel to be a “TAG” chan-
nel.
e Push
,
then push [9•
TAG] to set a “TAG.”
•“TAG” appears.
• Non-“TAG” channels are skipped during scan.
r To cancel the “TAG” setting, repeat above steps.
*Weather channel: U.S.A. version only.
Memory channel 15 is
scanned during memory
scan.
Memory channel 15 is
skipped during scan.
