670413
13
Zoom out
Zoom in
Previous page
1/24
Next page
8
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving and transmitting
D Setting the frequency
L If the transceiver is in the Memory mode, push [CLR] to exit the
Memory mode.
z Use the keypad to set the frequency.
Using dial:
1. Push [F] and then rotate [DIAL] to set the MHz digit.
• “ ” is displayed while setting the MHz digit.
2. Within 3 seconds*, Push [F] again, and then rotate [DIAL]
to set the kHz digit.
• “ ” disappears.*
* “ ” automatically disappears in 3 seconds after [F] is pushed,
or set the MHz digit.
Selecting a Memory channel
1. Push [MR] to enter the Memory mode.
The selected group and channel are displayed.
Example:
2. Rotate [DIAL], or use the keypad to select a channel.
D Receiving
When receiving a signal, “RX” is
displayed and audio is heard.
L Rotate volume control knob to adjust
the audio output level.
D Adjusting the squelch level
z Push [SQL] or [SQL] to adjust
the squelch level until the noise
just disappears, when no signal is
received.
The adjustment screen is displayed while adjusting.
D Using the Automatic Noise Limiter
(ANL) function
The function reduces noise components in the received
signal, such as those caused by engine ignition systems.
z Push [F], and then push [ANL] to turn the function ON or
OFF.
“ANL” is displayed.
D Transmitting
z Hold down [PTT], and then speak at
your normal voice level.
• “TX” is displayed.
TIP: To change the selected group:
1.
Push [F], and then push [GROUP]
to display the “Group List” screen.
2.
Rotate [DIAL], to select a group,
and then push [ENT].
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-A25 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-A25 series in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info