Manual Icom IC-A110 (page 17 of 24) (English)

12398

Zoom out

Zoom in

1/24

CLONING

D Data cloning

Cloning allows you to quickly and easily

transfer the programmed contents from one transceiver to

another transceiver, or, data from PC to a transceiver using

the optional CS-A110 cloning software.

D Transceiver to transceiver cloning

q Connect the OPC-591 CLONING CABLE

with adapter plugs to

the [MIC] jack of the master and slave transceivers.

• The master transceiver is used to send data to the slave trans-

ceiver.

w While pushing and holding [Y] + [Z] + [V/M], push

[POWER] ON to enter cloning mode (master transceiver

only—power ON only for slave transceiver).

•“CLONE” appears and the

transceivers enter the clone

standby condition.

e Push [POWER] on the mas-

ter transceiver.

•“CL-OUT” appears in the

master transceiver’s display.

•“CL-IN” appears automati-

cally in the slave trans-

ceiver’s display.

e When cloning is ﬁnished, turn

power OFF, then ON again to

exit cloning mode.

D Cloning using PC

Data can be cloned to and from a PC (IBM compatible) using

the optional CS-A110

CLONING SOFTWARE

and the optional OPC-

478

CLONING CABLE+ OPC-592 CLONING CABLE ADAPTER. Consult the

CS-A110

CLONING SOFTWARE HELP message for details.

D Cloning error

When the display at right ap-

pears, a cloning error has oc-

curred.

In this case, both transceivers automatically return to the

clone standby condition and cloning must be repeated.

]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-A110 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-A110 Manual

Product: