Manual Icom IC-A110 (page 13 of 24) (English)

12398

Zoom out

Zoom in

1/24

OTHER FUNCTIONS

■ Initial set mode

Initial set mode is accessed at power ON and allows you to

set seldom-changed settings. In this way you can “customize”

transceiver operations to suit your preferences and operating

style.

D Entering initial set mode

q While pushing and holding [V/M] + [TS(DIAL)], push

[POWER] sw to turn power ON.

• The transceiver enters initial set mode and “MN”, “BP”, “ST” or

“PR” (p. 11) appears on the display.

w Push [TS(DIAL)] to select the

desired item as described

below and at right.

e Turn [DIAL(TS)] to select the

desired condition.

r Push [SCAN] to exit initial set

mode and select the previous

operating mode.

D Memory names

This item allows you to display a memory name instead of fre-

quency.

• When a memory channel has not been programmed with a

name, frequency indication appears instead.

D Beep tones ON/OFF

Confirmation beep tones nor-

mally sound when you push a

key. These can be turned ON or

OFF as you prefer.

D Side tones ON/OFF

When using an optional headset

such as those from the David

Clark Co. via the adapter, the

transceiver outputs your trans-

mitted voice to the headset for

monitoring.

• Optional OPC-871 HEADSET

ADAPTER is required.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-A110 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-A110 Manual

Product: