12398
9
Zoom out
Zoom in
Previous page
1/24
Next page
6
3
SCAN OPERATION
Scan operation
q Push [V/M] to select memory mode or VFO mode, if nec-
essary.
•“ appears on the memory mode.
w Make sure the squelch level is set to the threshold point.
Set a squelch level (01 to 25) where the noise is muted.
e Push [SCAN] to start scan.
To change the scan direction, turn [DIAL].
•“SCAN (or P SCAN) ashes while scanning.
r Push [SCAN] again to stop the scan.
NOTE: Normal scan or Priority scan is pre-programmed
by cloning. Please ask your dealer or system operator for
details.
ï NORMAL SCAN
Memory lock scan
Repeatedly scans memory
channels except skip (lockout)
channels.
VFO scan
Repeatedly scans all
frequencies over the entire
band.
Scan step is minimum channel
spacing. (eg 25 kHz or 8.33*
kHz)
*Except USA version
ï PRIORITY SCAN
Priority memory scan
While scanning on a memory
mode, priority watch checks
for a signal on the selected
priority channel every 250 m
sec except lockout channel.
MR
Mch 2*
Mch 1
Mch 3
Mch 20
250 msec.
*: Lockout ch
SKIP
Scan
Jump
Start
highest
frequency
lowest
frequency
Priority
ch
Mch 2*
Mch 1
Mch 3
Mch 20
250 msec.
250 msec.
SKIP
*: Lockout ch
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-A110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-A110 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info