12390

Icom IC-910H Manual

39
Zoom out
Zoom in
Previous page
1/88
Next page
37
5
RECEIVE AND TRANSMIT
■ Split frequency operation
Split frequency operation allows you to transmit and
receive on two different frequencies in the same fre-
quency band. Split frequency operation uses 2 fre-
quencies, one in VFO A and the other in VFO B.
q Set a receive frequency in VFO mode.
• Either VFO A or VFO B can be used.
w Push [A=B 2] for 1 sec.
•The undisplayed VFO contents are cleared and equal-
ized to the displayed frequency.
e To change the receive frequency, rotate the tuning
dial.
r To replace the transmit and receive frequencies,
push [A/B 3].
t To change the transmit frequency, rotate the tuning
dial while pushing [CHECK 7].
y Push [SPLIT].
•“SPLIT” indicator appears.
•Now you can receive on the displayed VFO and transmit
on the undisplayed VFO.
• To monitor the transmit frequency, push [CHECK 7].
u Push [SPLIT] to cancel the split frequency opera-
tion.
•“SPLIT” indicator disappears.
Cross mode communication can be performed using
the split function. (e.g. USB and CW)
[A=B 2]
[A/B 3]
[SPLIT]
[TRANSMIT]
USBUSB
SPLITSPLIT
VFO B
USBUSB
VFO B
USBUSB
VFO A
■ Full duplex operation
The MAIN and SUB bands are activated indepen-
dently, therefore, simultaneous transmission and re-
ception in different frequency bands are possible.
q Push [M/S•BAND] to select the desired frequency
band for transmission.
•Push [V/M 1] to select VFO or memory mode, if desired.
•Push [SSB/CW] or [FM] to select the desired operating
mode.
w Rotate the tuning dial to set the desired frequency.
•Direct frequency input from the keypad is also available.
e Push [SUB] to enable the SUB band access.
•Push [M/S•BAND] for 1 sec. to select the desired fre-
quency band, if desired. (when the optional UX-910 is
installed.)
•Push [V/M 1] to select VFO or memory mode, if desired.
•Push [SSB/CW] or [FM] to select the desired operating
mode.
r Push [PTT] to transmit.
• SUB band mute function
The SUB band mute function mutes receiving audio
from the SUB band while transmitting.
q Push [SET] then [TRANSMIT] to enter the TRANS-
MIT set mode.
w Push [DN ▼] or [▲ UP] to select the SUB band
mute item.
•“Audio” is displayed.
e Rotate the tuning dial to turn the SUB band mute
function ON and OFF.
•Push [M-CL 5] for 1 sec. to return to the default setting.
r Push [TRANSMIT] to exit from the TRANSMIT set
mode.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-910H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-910H in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info