12390

Icom IC-910H Manual

21
Zoom out
Zoom in
Previous page
1/88
Next page
19
4
BASIC OPERATION
■ MAIN and SUB bands
The IC-910H has dual bands: 144 MHz and 430(440)
MHz. These bands can be assigned to the MAIN and
SUB bands for operating convenience.
Each MAIN and SUB bands have independent fea-
tures.
The MAIN band is the operation for both transmit and
receive, and is displayed in the upper area of the func-
tion display. The SUB band is the operation for only re-
ceive, and is displayed in the lower area of the function
display.
Simultaneous receive on both the MAIN and SUB
bands is possible, however the transmission can
only be transmitted on the MAIN band— not on the
SUB band.
In the case of satellite operation mode, the SUB
band is used for the transmission band.
DD
Exchanging the MAIN and SUB bands
The function display shows both the MAIN and SUB
band frequencies and both bands can receive signals
simultaneously.
Assign 144 MHz or 430(440) MHz band, whichever
band you want to transmit or be called on, as the MAIN
band.
➥ Push [M/S] to exchange the MAIN and SUB bands.
F
M
VFO A
VFVF
O
A
F
M
S
1
3
5
7
9 20
40
60dB60dB
60dB
S
1
3 5
7
9
20
40
MAIN band display
SUB band display
F
M
VFO A
VFVF
O
A
F
M
S 1 3
5
7
9 2020
4040
60dB60dB
60dB
S
1
3 5
7
9
20
40
F
M
VFO A
VFVF
O
A
F
M
S 1 3
5
7
9 2020
4040
60dB60dB
60dB
S
1
3 5
7
9
20
40
MAIN band display
SUB band display
F
M
VFO A
VFVF
O
A
F
M
S 1 3
5
7
9 2020
4040
60dB60dB
60dB
S
1
3 5
7
9
20
40
F
M
VFO A
VFVF
O
A
F
M
S 1 3
5
7
9 2020
4040
60dB60dB
60dB
S
1
3 5
7
9
20
40
S
U
B
DD
Accessing the SUB band
Normally, any operations, such as tuning, operating
mode selection, memory channel selection and pro-
gramming, etc., are performed on the MAIN band.
However, these operations can be performed on the
SUB band by using the SUB band access capability.
➥ Push [SUB] to switch the SUB band access capa-
bility ON and OFF.
•“SUB” indicator appears while the SUB band access ca-
pability is activated.
•Even during SUB band access, transmission cannot be
made on the SUB band.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-910H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-910H in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info