Manual Icom IC-910H (page 13 of 88) (English)

12390

Zoom out

Zoom in

1/88

PANEL DESCRIPTION

!1 DATA TRANSMISSION SPEED INDICATOR

(p. 52)

Appears when 9600 bps speed is selected for

packet transmission.

!2 SPEECH COMPRESSOR INDICATOR (p. 36)

Appears when the speech compressor is activated.

!3 SET INDICATOR (p. 55)

Appears when [SET] is pushed.

Disappears after any switch is pushed.

!4 VOX INDICATOR (p. 33)

Appears when the VOX function is activated.

!5 SWEEP INDICATOR (p. 29)

Flashes while the simple bandscope function is ac-

tivated.

!6 SCAN INDICATOR (p. 46)

Flashes while scanning.

!7 NOISE REDUCTION INDICATOR (p. 31)

Appears when the optional DSP unit, UT-106, is in-

stalled and the noise reduction is activated.

!8 AGC TIME CONSTANT INDICATOR (p. 28)

Appears when the FAST AGC time constant is se-

lected; disappears when the SLOW AGC time con-

stant is selected.

!9 NOISE BLANKER INDICATOR (p. 30)

Appears when the noise blanker function is acti-

vated.

@0 AUTO FREQUENCY CONTROL INDICATOR

(p. 28)

Appears when the AFC (Automatic Frequency Con-

trol) function is activated.

@1 PRE-AMP INDICATOR (p. 16)

Appears when the optional pre-amplifier unit,

AG-25, AG-35 and/or AG-1200, is connected and

the pre-ampliﬁer function is activated.

@2 ATTENUATOR INDICATOR (p. 29)

Appears when the attenuator is activated.

@3 MULTI-FUNCTION BAR METER

➥ Shows the receiving signal strength as an S-

meter while receiving. Peak hold function is avail-

able and can be switched ON and OFF in regular

set mode. (pgs. 26, 56)

➥ Shows the relative transmit output power level as

an RF power indicator during transmit. (p. 32)

➥ Shows signal availability in the sweeping band,

and the “▼” indicator indicates the center of the

sweeping frequency band.

@4 TONE SQUELCH INDICATOR (pgs. 30, 34)

“T” appears when the tone encoder function is acti-

vated; “T-SQL” appears when the tone squelch

function is activated.

@5 SUB INDICATOR (p. 19)

Appears when the SUB band access is enabled.

@6 SATELLITE INDICATOR (p. 49)

Appears while satellite operation mode is selected.

• - : Satellite operation with normal mode

is selected.

• - : Satellite operation with reverse mode

is selected.

@7 REMOTE INDICATOR (p. 78)

Appears when the transceiver is controlled remotely

via the optional CI-V level converter, CT-17.

@8 LOCK INDICATOR (p. 25)

Appears when the dial lock function is activated.

REV

SATL

NOR

SATL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-910H in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-910H Manual

Product: