670296
207
Zoom out
Zoom in
Previous page
1/212
Next page
198
19
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Receiver
•Receivesystem
HF/50/144/430 MHz band
:
Double superheterodyne system
1200 MHz band
: Triple superheterodyne system
•Intermediatefrequencies
1st : 64.455 MHz
(HF/50 MHz band)
10.850 MHz
(144 MHz band)
71.250 MHz
(430 MHz band)
243.950 MHz
(1200 MHz band)
2nd : 36 kHz (HF/50/144/430 MHz)
10.950 MHz
(1200 MHz)
3rd : 36 kHz (1200 MHz)
•Sensitivity
SSB, CW : 0.16 µV
(1.80–29.99 MHz)*
1
(10dBS/N)BW=2.4kHz 0.13 µV (50.0–54.0 MHz)*
2
0.11 µV (144/430/1200
MHz)
AM (10 dB S/N) : 12.6 µV (0.5–1.799 MHz)*
1
BW=6kHz 2.0 µV (1.80–29.99 MHz)*
1
1.6 µV
(50.0–54.0 MHz)*
2
1.4 µV (144/430 MHz)
FM (12 dB SINAD) : 0.5 µV (28.0–29.7 MHz)*
1
BW=15kHz 0.32 µV (50.0–54.0 MHz)*
2
0.18 µV (144/430/1200
MHz)
DV (1%BER) : 1.0 µV (28.0–29.7 MHz)*
1
CHSpace=12.5kHz 0.63 µV (50.0–54.0 MHz)*
2
0.35 µV (144/430/1200
MHz)
•Squelchsensitivity
Frequency band Squelch sensitivity
HF
SSB : Less than 5.6 µV*
1
FM : Less than 0.3 µV*
1
50 MHz
SSB : Less than 5.6 µV*
2
FM : Less than 0.3 µV*
2
144/430 MHz
SSB : Less than 1.0 µV
FM : Less than 0.18 µV
1200 MHz
SSB : Less than 1.0 µV
FM : Less than 0.18 µV
*
1
Preamp 1 is ON. *
2
Preamp 2 is ON.
•Selectivity
(IF filter shape is set to SHARP.)
SSB (BW: 2.4 kHz) : More than 2.4 kHz/–6 dB
Less than 3.4 kHz/–40 dB
CW (BW: 500 Hz) : More than 500 Hz/–6 dB
Less than 700 Hz/–40 dB
 RTTY(BW:500Hz) :Morethan500Hz/–6dB
Less than 800 Hz/–40 dB
AM (BW: 6 kHz) : More than 6.0 kHz/–6 dB
Less than 10.0 kHz/–40 dB
FM (BW: 15 kHz) : More than 12.0 kHz/–6 dB
Less than 22.0 kHz/–40 dB
DV
(CH space: 12.5 kHz)
: More than –50 dB
•Spuriousandimagerejectionratio
HF/50 MHz band* : More than 70 dB
*except IF through on 50 MHz band
144/430 MHz band : More than 60 dB
1200 MHz band
: More than 50 dB
•AFoutputpower : Morethan2.0Wat10%
(at 13.8 V DC) distortion with an 8 ø load
•AFoutputimpedance : 8ø
•RITvariablerange :±9.999kHz
•PHONESconnector : 3-conductor6.35(d)mm(
1
4)
•ExternalSPconnector :2-conductor3.5(d)mm
(
1
8)/8 ø
•DSPANFattenuation : Morethan30dB
(with 1 kHz single tone)
•DSPMNFattenuation :Morethan70dB
•DSPNRattenuation :Morethan6dB
(noise rejection in SSB)
Antenna tuner
•Matchingimpedancerange
HF bands : 16.7 to 150 ø unbalanced
(Less than VSWR 1:3)
50 MHz band : 20 to 125 ø unbalanced
(Less than VSWR 1:2.5)
•Minimumoperatinginput :8W(HFbands)
power 15 W (50MHz band )
•Tuningaccuracy :VSWR1:1.5orless
•Insertionloss :Lessthan1.0dB
(after tuning at RF power 100 W)
All stated specifications are typical and subject to change without
notice or obligation.
207


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-9100 in the language / languages: English as an attachment in your email.

The manual is 43,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info